If you’ve just gotten your hands on a new pair of Skullcandy Indy Evo’s then you’re probably ready to start pairing them to your devices. We’ll walk you through the process step by step. Let’s dive in!
How to Pair Skullcandy Indy Evo to each other
To pair your earbuds to one another, you will need to place your earbuds in pairing mode. Here’s how:
- Place both earbuds in the charging case; your earbuds LED should turn red
- Close the lid of the case
- now open the lid, and remove both of your earbuds
Your earbuds should now automatically pair to one another and should be ready to pair to your device.
If your device still hasn’t paired with one another, then don’t worry; resetting your device should solve the issue. Here’s how:
- First, place both earbuds in the charging case
- Remove your Skullcandy earbuds from your device’s Bluetooth list
- Turn off Bluetooth on your device’s Bluetooth settings
- Remove only the right earbud from the case
- tap the center of the earbud four times, then place it back in the case
- now repeat the same process with the left earbud
- Close the lid on the charging case
- Now remove both your earbuds from the case
And they should now automatically pair with one another. This should have solved your issue. However, if the issue still persists take a look at our complete guide on how to solve the issue.
How to Pair Skullcandy Indy Evo to any device
Pairing your Skullcandy Indy Evo to your device is quite simple and can be done in a matter of seconds. Here’s how.
First, place your earbuds in pairing mode. Here’s how:
- Place both earbuds in the charging case; your earbuds LED should turn red
- Close the lid of the case
- now open the lid, and remove both of your earbuds
Now open the Bluetooth list on the device you would like to connect your Indy Evo too. Then select your indy Evo on the device’s Bluetooth list and click on “Connect”. And that’s it! Your earbuds should now be connected to your device.
Why is my Indy Evo flashing Red & Blue?
If you notice your earbuds flashing red & blue, this means that they are in pairing mode and are ready to connect to your device. All you would need to do at this point is open your device’s Bluetooth list and connect your device.
How to turn my Indy Evo On or Off & Other Useful tips
All you would need to do to turn your earbuds on is to tap the center of both earbuds 4 times. To turn your Indy Evo earbuds off, tap the center of both earbuds 6 times.
Additionally, there are a few other useful features to know. Such as how to turn up the volume on your device. To do this, you’ll want to tap once on the right earbud to increase the volume & once on the left side if you would like to decrease the volume.
To Skip or repeat a track, you can press and hold the right side of your earbuds for 2 seconds to skip a song. Tap & hold the left side for 2 seconds to repeat a song.
You can also pause your music by tapping either your left or right earbuds twice.
You can also activate your voice assistant by tapping either the left or right earbuds 3 times.
How to charge your Skullcandy Indy Evo
Charging your Indy Evo is quite straightforward. All you would need to do to charge the earbuds is place them in the case. You’ll also need to charge the charging case. To do this, simply plug in the provided charging cable to the case’s connector port, and your charging case should begin charging.
