To pair your Jabra earbuds, headphones, or headsets, you will first need to enable pairing mode and then select your Jabra device from your Source device’s Bluetooth list to complete the connection process.
The pairing process varies depending on the Jabra model you own, so below, we provide a complete list of every single Jabra earbuds, headphones, and headset, as well as instructions on how to pair them to any device.
True Wireless Earbuds:
Elite 3/ Elite 4 Active / Elite 5 / Elite 7 Active / Elite 7 Pro / Elite 85t / Elite Active 75t
- Turn your earbuds on by removing them from the case (You can also turn them on by pressing the button on both earbuds once)
- Now to enter pairing mode, press and hold the back buttons on both earbuds until the LED begins to flash blue (around 3 seconds).
- Now navigate to your device’s Bluetooth list and select your earbuds to complete the connection.
- If asked for a pin code, enter “0000”
Wireless Sports Headphones:
Elite Sport
- To pair, press and hold the Multi-Function button, located on the right earbud until a voice guide prompts (Around a 3-second hold)
- Now navigate to your device’s Bluetooth list and select your earbuds to complete the connection.
(For first-time users, you may need to hold the volume down button on the left earbuds for around 3 seconds. This is usually only necessary for first-time use).
Alternative Method Pair with Jabra Sport Life App:
- Install the Jabra Sport Life app on the app store or Google Play Store, depending on the device you own.
- Create an account and follow the on-screen instructions to get set up with your device.
Wireless Stereo Headphones:
Elite 85h
- Wear the headphones
- Press and hold the Multi-function button, located on the right earcup, until the LED flashes Blue and a voice guide prompts. (Around a 3-second hold)
- Now navigate to your device’s Bluetooth list and select your earbuds to complete the connection.
Elite 45h
- Slide the power switch towards the Bluetooth icon and hold until the LED begins to flash blue.
- Now navigate to your device’s Bluetooth list and select your earbuds to complete the connection.
Jabra Bluetooth Mono Headsets:
Talk 35 / Talk 45
- Slide the power switch to turn on your Talk 35 headset
- Press and hold the answer/end button until the LED begins to flash blue. (Around a 5-second hold)
- If required, enter pin code “0000”
- Now navigate to your device’s Bluetooth list and select your earbuds to complete the connection.
Talk 55
- Place your Talk 55 in its charging case.
- Press and hold the Jabra button on the bottom of the case until the LED starts to flash blue. (Around a 3-second hold)
- If required, enter pin code “0000”
- Now navigate to your device’s Bluetooth list and select your earbuds to complete the connection.
Jabra Office Headsets:
Engage 65 Stereo / Mono
Connect the Headset’s Base to a computer:
- Plug in the provided Micro USB cable into a port marked with the same icon as shown on the cable.
- Plug the base into a power supply using the provided cable.
- Make sure that the Engage is set as the default playback device and recording device. (This can be done in your operating systems sound settings)
Connect the Headset to a computer:
- Plug in the provided Micro USB cable into your Pc’s available port.
- Now press and hold the volume up button and the mute button simultaneously while plugging in the other end of the cable into your headset.
- Release the button once the headset’s LED stops blinking green.
- You can now select your headset as an audio playback device on your PC.
Connect to a Desk Phone (with a headset port)
- Plug in the provided telephone cable into the base’s port which is marked with a telephone icon
- Plug in the other end into your tele[jpmes headset port.
- Plug in the provided supply cable into the base.
- You should now be all set.
Connect to a Desk Phone (without a headset port)
- Plug in the headset cable into the phone port on the base.
- Now plug in the supplied telephone cable into the port with a desk telephone icon on the base and on the headset port on the desk phone.
- Now plug in the provided power supply cable into the base.
- And you should now be all set.
Engage 55
First-time setup:
Out of the box, your Engage 5 and Jabra link 400 come pre-paired. All you would need to do is plug in the Jabra link onto your PC and turn on the headset. You may need to wait around 15 seconds for the headset to be detected by your PC. (You may also need to set your headset as the output and input device on your PC settings.)
How to pair manually:
There may be instances in which your Engage headset and Jabra link don’t come pre-paired if this is the case, then you can set them into pairing mode manually. Here’s how:
- Make sure your headset is tuned off. ( You can turn off the headset by pressing the hold and call buttons for around 5 seconds.)
- Now press the Call button on the headset until the LED flashes blue. (Around a 4-second hold.)
Evolve 2 30 / Evolve2 40/ Evolve2 65
- Plug in the Jabra Evolve2 30 into a USB-A or USB-C port on your PC. You can also connect to your Mobile device if it is equipped with a USB-C port.
Evolve2 75/ Evolve2 85
First-time setup:
- The Jabra Link comes pre-paired with your device out of the box.
- Plug in the provided Jabra link device into a USB port into your PC.
- You should now be connected.
(You may also need to set your headset as the output and input device on your PC settings.)
How to pair manually:
You can pair your headset to your Jabra link manually by downloading and using Jabra Direct.
How to Pair to your Mobile Device:
- Slide the power button towards the Bluetooth icon and hold it until the LED begins to flash Blue and a voice announcement appears.
- Now go to your device’s Bluetooth list and select your earbuds to complete the connection.
Once in Pairing Mode, Locate your Earbuds/Headphones on Your Bluetooth List and Connect:
Once your device is in pairing mode, all you would need to do is navigate to your Bluetooth list on your source device and select your Jabra headphones or earbuds to complete the pairing process. Here’s how depending on the device you’re connecting to.
iPhone
- Go to Settings.
- Click on Bluetooth and make sure that it’s enabled.
- Select your Earbuds from the device’s Bluetooth list and connect.
Android
- Navigate to the Settings App.
- Click on Connections > Bluetooth.
- You’ll want to make sure that Bluetooth is turned on.
- Select your Earbuds from the device’s Bluetooth list to connect.
Mac
- Click on the Apple icon in the top left corner.
- Now select System Preferences.
- Click on Bluetooth, and ensure it’s enabled.
- Select your earbuds from the Bluetooth list and click Connect.
Windows
- Select the Start Button
- Select Settings > Devices
- Click on Bluetooth & Other Devices, and ensure Bluetooth is enabled.
- Now select your earbuds from the Bluetooth list and click Connect.
How to Pair to Samsung TV
The Bluetooth settings location will vary depending on the Samsung model year you own. We’ve provided instructions for every single Samsung model year. Find the model year you own and simply follow the instructions:
- 2022 Models: Menu > Settings > All Settings > Sound > Sound Output > Bluetooth Speaker List > Select your Jabra earbuds from the list to connect.
- 2018-2021 Models: Settings > Sound > Sound Output > Bluetooth Speaker List > Select your Jabra earbuds from the list to connect.
- 2017 Models: Settings > Sound > Sound Output > Speaker List > Select your Jabra earbuds from the list to connect.
- 2016 Models: Settings > Sound > Expert Settings > Wireless Speaker Manager > Bluetooth Audio Devices > Select your Jabra earbuds from the list to connect.
- 2015 Models: Menu > Sound > Speaker Settings > Bluetooth Headphones > Select your Jabra earbuds from the list to connect.
How to Pair to LG TV
- Go to Settings > Advanced Settings.
- On the Sound menu, select Sound Out.
- Now select LG Sound Sync Bluetooth, and click on Detect.
- Select your Jabra earbuds and connect.
How to Pair to Hisense TV
- Go to Settings.
- Select Network. (Some models may display it as Remotes & Accessories instead)
- Click on Bluetooth and select your Jabra earbuds or headphones from the list.
How to Pair to Vizio TV
- Go to your Settings menu.
- Click on Sound Output
- On the Speakers List, select your Jabra earbuds or headphones and connect.
What to do If Your Jabra Earbuds or Headphones Aren’t Connecting
Disconnect and Forget your Jabra Headphones & Earbuds from your Source Device’s Bluetooth List & Reset your device
If your device doesn’t seem to be pairing, reset the connection by going into your device’s Bluetooth list and “Forgetting” your Jabra earbuds/headphones from your device’s Bluetooth list.
Now place your earbuds or headphones back in pairing mode and re-connect to your device.
Reset Your Earbuds/Headphones
Next, try resetting your earbuds or headphones. This will clear all pairing history saved on your Jabra device and allow it to pair from scratch. After resetting place your device on pairing mode and re-connect to your device.
Restart your Source device
Another thing to try is to restart your source device (The device that you’re connecting to). Restarting a device will clear the ram completely, thus removing bugs and glitches that may have resulted in pairing issues.
Turn Bluetooth Off and back on again on your source device
This is a simple fix but can be the solution at times; turning your Bluetooth off and back on again will reset its Bluetooth capabilities which in some cases should solve the issue.
- How to Pair Meta Quest 3 Controllers with Your Quest 3 Headset: A Quick Guide
- How to Charge Meta Quest 3: A Guide to Powering Up Your VR Experience
- How to Cast Meta Quest 3 to Samsung TV: A Step-by-Step Guide
- How To Factory Reset Your Meta Quest 3: A Step-by-Step Guide
- How to Power On and Off the Meta Quest 3
