Blink security cameras are a great way to secure your home. They allow you to keep an eye on your home anytime on your smartphone. Blink cameras are a relatively inexpensive way to install high-quality cameras in your home, both inside and outside.
Blink offers many different security cameras. Each one can be connected to the other using a Sync Module. It is simple to reset a Blink camera and it only takes a few minutes. If you need to reset a Blink camera, you can press and hold the reset button on the sync module.
This article provides details on Blink cameras and how to reset them.
How to reset Blink cameras
When your Blink camera is not working properly, it may need to be reset. To reset your Blink camera, press and hold the reset button on the sync module. After the light turns red, reinstall the sync module in the Blink app.
To reset a Blink mini camera, press and hold the reset button at the bottom of the camera. Once again, after the light turns red, reinstall the sync module in the Blink app.
Another way to reset your Blink cameras is to unplug each camera, or just the problem camera, and plug them back in.
Where is the reset button on the Blink sync module?
If you want to reset your Blink sync module, press and hold the reset button found on the sync module. The button should be next to the USB port. Pressing this button will reset your device back to setup mode, or factory settings.
When should I reset my Blink camera?
There are two main reasons to reset your Blink camera. The first reason is that your camera is not working properly. The second is that you want to reset your camera back to factory settings.
If you have problems with your camera, resetting it may fix the issue. If resetting your camera didn’t work, you can power cycle your internet modem or your sync modem to see if that will solve the issue.
Power cycle mode
You can power cycle your internet modem by unplugging it and the wifi router from the power source, waiting for a minute, then plugging them back in. Your modem should have a solid green light and a blue light.
If this did not solve the problem with your Blink cameras, you can power cycle the sync module in a similar process.
If resetting the power cycle mode did not work, you can reset your sync module. Blink XT2, outdoor and indoor cameras need a sync module to operate. This is what connects the Blink cameras to the internet.
The sync module is the easiest way to reset your Blink cameras. It allows you to reset them at the same time rather than reset each camera individually. The reset button is found on the sync module and will reset the whole system.
When you reset your Blink cameras using the button on the sync module, each camera goes offline. Next, delete the sync module in your Blink app and reinstall it.
To reset the Blink Module, press and hold the reset button for at least 10 seconds. The button is located on the side of the module. Hold the button until the light turns red. It should take no longer than 15 seconds. When the reset is complete, you will see a solid green light and a blue light.
To delete the sync module and reinstall it, first open the Blink app and click on the question mark icon. Select Delete Sync Module. It will prompt you to enter the sync module serial number. After you enter the number, select the Delete option.
The next step is to reinstall the module. Go to Home and click the plus sign. Select your system and enter the serial number. Click Discover Device and then click Join. This will reinstall the sync module.
If this did not work to fix the issue with your Blink camera XT2, you may need to contact customer support.
How to reset a Blink Mini camera
Because the Blink Mini camera doesn’t need a sync module, it must be reset on the actual device. As mentioned before, to reset this type of camera, press and hold the reset button on the bottom of the camera for 10 to 15 seconds.
After it has been reset, the lights should be green and blue. If you do have a sync module that your Blink Mini camera is connected to, you can reset the module to fix the issue in your camera. Remember to delete and reinstall the module on the Blink app.
What if my Blink camera still isn’t working?
If the above steps did not fix the issue with your Blink camera, make sure you have a strong internet connection. The most likely issue with Blink cameras is that the connection to the internet is not stable.
To make sure your Blink camera is connected to the internet, open the Blink app and click on the sync module icon in the bottom left corner. This will show you which network your camera is connected to. If it is connected to the wrong network, tap Change Wifi Network to switch it.
If you have tried everything and can’t get your Blink camera to work, contact customer support.
Blink cameras are made to be installed without a professional, providing a DIY security system that you can control through your smartphone. If you are having problems with one or more of your cameras, it may be a problem with the internet.
The first step is to make sure your Blink cameras are connected to the right wifi network. You can check this in the Blink app. If your internet is stable and your cameras are connected, resetting the cameras may solve the problem.
Press and hold the reset button on the sync module to reset each of your Blink cameras. Delete and reinstall the sync module on your Blink app.
Resetting your Blink cameras is easy. But if this didn’t solve the problem, you should contact customer support.