Why Do My Bluetooth Headphones Keep Disconnecting?

One of the major issues with Bluetooth headphones is that it’s more prone to technical difficulties. One of the major ones being an unstable connection. A common issue being repeated disconnection upon connecting. So what may be the reason your Bluetooth headphones repeatedly disconnect upon connection?

there are a few reasons why your Bluetooth Headphone may be disconnecting:

  • low battery
  • Interference
  • Connecting to an Incompatible device
  • Too far out of range
  • The old device paired to your headphones is requesting a connection

Here are the possible causes why your Bluetooth headphones may be disconnecting upon pairing. Let’s take a look at these in detail as well as how you can fix the issue.

Reasons Your Bluetooth Headphones Keep Cutting In & Out:

Requesting Pairing to an old device

If you previously used your headphones on another device and haven’t disconnected the connection form that device what typically happens is that your headphones will keep that device as priority connection before it connects to a different device.

Solution: Reconnect to your headphones with the old device and then disconnect from the device. Once disconnected from the old device try pairing to your new device.


Another common cause for Bluetooth headphones to keep disconnecting upon connection is interference. Your Bluetooth headphones can experience connection issues from electromagnetic devices & appliances nearby.

Solution: Get away from any object which produces a large amount of electromagnetic interference.

Too far out of range

A reason you may be experiencing an unstable connection can be that you are trying to pair your devices too far apart.

How to Fix JLab Earbuds Not Charging
How to Fix JLab Earbuds Not Charging

Solution: When pairing your devices ensure they are in close enough range for a successful connection.

Low Battery

One of the common causes of experiencing constant connection and disconnection is low battery. When your headphones have insufficient power it can experience issues keeping a stable connection.

Solution: Charge your headphones for 15- 20 minutes and try connecting once again.

Connecting to an Incompatible device

Old Bluetooth headphones don’t always work with newer devices.

Solution: ensure if your headphones Bluetooth version is compatible with the device you’re trying to connect to.

Bluetooth Versions:

One of the main reasons for pairing issues occurs from two devices having different versions of Bluetooth. This occurs of one of your devices has a fairly old version of Bluetooth. Thre are also some instances where devices with older versions of Bluetooth can work with a newer Bluetooth device but don’t necessarily get along, which will cause certain issues like disconnecting unexpectedly.

Bluetooth relies on both software as well as hardware in order to function accordingly. So a new version of Bluetooth such as Bluetooth 5 can work with an extremely old version such as Bluetooth 2.1 which was launched in 2007, although there are devices that use a low-energy version known as Bluetooth Smart which won’t work with older versions of Bluetooth. So a product with an older version of Bluetooth won’t work with a device that uses Bluetooth smart. This is why it’s important that you check what type of Bluetooth your device uses.

How To Fix Bluetooth Pairing Issues:

there are various reasons you may be experiencing pairing issues with your Bluetooth headphones. Let’s take a look at a few things you should know in order to have a successful pairing between your headphones and the device.

Determine Correct Pairing Process

The pairing process can be different for each device. Such as connecting Bluetooth to your car commonly requires you to enter a PIN code whereas other devices simply require you to tap on the “connect” button. Certain Bluetooth headphones require you to hold down on a button in order to pair to your device.

Ensure Proper Connection Distance

As mentioned above a common issue with Bluetooth pairing is the device is not within adequate range to attain a successful connection.

Reset The Device

Occasionally the device just needs a quick reset in order to solve the issue.

Disconnect Connection From Old Devices

As mentioned above one of the most common causes for pairing issues is not disconnecting the connection between your device and your headphones.

Simply turning off the Bluetooth on the device is not enough, you must completely disconnect the connection, or else your device might prioritize your previous connection over the new one.

Ensure Both Devices Have Sufficient Battery Life

It’s common for devices to turn off Bluetooth capabilities when the battery is quite low, so charge both devices to ensure a proper stable connection.

Forget Device & Rediscover

Sometimes you will need to completely forget your device from your system such as phone, pc..etc in order to avoid bugs. Simply forget your device and rediscover it to ensure a stable connection.

Avoid Interference

Your Bluetooth connection can be disrupted by interference from other nearby devices such as your wifi router. Moving away from other devices can establish a better connection.

Ensure airplane & power-saving modes are turned off

Power-saving mode as well as airplane mode can slow down and shut off Bluetooth functionalities. In order to ensure proper connection make sure power-saving mode and airplane modes are turned off.

Related Questions:

1. My device can’t find my Bluetooth headphones

There are a few causes for this issue, there are a few things you can do to solve this issue:

  • If your device was connected to a different device reconnect it to that device and disconnect your phone from that device. ( Note that turning off the Bluetooth on that device isn’t always enough, you need to disconnect your headphones from the device otherwise your Bluetooth headphones will prioritize your old device connection over your new device.
  • Ensure your phone isn’t on airplane mode
  • Try rebooting both devices
  • Avoid interference by moving away from any device that may cause a disruption
  • Ensure your device and headphones are within a reasonable range for connection

2. Why do I hear static noise on my headphones?

There are a few reasons why you may be hearing static noise on your headphones, these include:

  • Wrong Audio Settings
  • Loose or Disconnected Wires
  • Auxiliary Port Issues
  • Damaged Headphone Speaker

3. What are the advantages of Bluetooth headphones?

There are a few key advantages to using Bluetooth headphones opposed to wired headphones these include:

  • Sound Quality
  • Productivity
  • Multiple-Compatibility
  • Cord-Free
  • Effective for working out
  • Further Distance Listening

Final Thoughts

So there you have it, there are many issues that can occur when trying to pair your Bluetooth device to your headphones. The most important thing is to ensure you follow good practices to connect your device as listed above in order to ensure a proper stable connection.

When it comes to Bluetooth headphones it’s important to note that they aren’t always going to be compatible with older versions of Bluetooth, and it’s not necessarily the older version of Bluetooth but the hardware in which it is integrated into. As mentioned above some old Bluetooth devices work with newer versions of Bluetooth as long as the newer version does not contain Bluetooth Smart which uses a lower frequency than other versions. So there it is, we hope you enjoyed this article.

Steven Carr

Steven is a certified IT professional and gaming enthusiast. He has been working in the tech industry for over 10 years, and specializes in all things Tech-related. When he's not geeking out over the latest hardware or software release, he can be found testing out the latest video game.

Recent Posts